Transmission Crossmember & Motor Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baby John · 01-08-2010, 02:32 PM

Tyler's truck was originally a 6 cylinder with a 3 on the column. It was converted to a SB 350 and 350 Auto. The crossmember job was horrible and I'm needing to fix it. Any specific suggestions, or examples of what others have done? Is there a standard swap that works?

Also, it looks like the PO welded in some motor mounts kinda poorly, and it also looks like he used 2 left hand mounts because one of them is directly reversed from the other. Same question, is there a standard swap for this?

Any help would be appreciated.

01-08-2010, 02:32 PM	#1
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Transmission Crossmember & Motor Mounts Tyler's truck was originally a 6 cylinder with a 3 on the column. It was converted to a SB 350 and 350 Auto. The crossmember job was horrible and I'm needing to fix it. Any specific suggestions, or examples of what others have done? Is there a standard swap that works? Also, it looks like the PO welded in some motor mounts kinda poorly, and it also looks like he used 2 left hand mounts because one of them is directly reversed from the other. Same question, is there a standard swap for this? Any help would be appreciated. __________________ Baby John & Tyler Shows My son and I are resto-rodding a '72 GMC Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.