Need some advice... Just got started

[ct4613]

Just pulled my 66 into my shop this mornin, its been sitting inside my dads machine shed for the last 10 years, and i'm wondering, where do I start??
Dont have much money, just bought my farm last fall so I have a pretty tight budget now that i'm a homeowner. Here is my plan. Safety first. Ordering new brake line kit/drums/pads. Also new ball joints. I want to do a static drop, and my springs front and rear are shot. I've seen a kit with springs for front and rear, and shocks for about 600 bucks i think. THinking of eventually dropping it 4" in the front and 5-6 in the rear. So would the spring kit be a good start, and then buy the drop spindles later? Going to do the bodywork myself, i'm just going to clean it up and fix a couple dents/rust spots and shoot it with a flat black primer for this year. Last question for now. I traded for a set of 20" wheels that were on a 02 chevy half ton, that i dont beleive will fit on my 66 because of the large diameter center hub.(they are 6 bolt hubs on my 66) Does anybody make an adaptor plate so i can put more current wheels on my 66. Dont want to spend money on tires(mine are pretty dry rotted) if i can buy adaptors for these 20" wheels i have. Ok i'll stop with the questions for now. Cant beleive i waited 10 years to start on this!!! I think there are going to b some late nights in the shop. I work on dads tractors/combines/and other farm equipment all winter long, but its pretty hard to make a tractor COOL.