Aftermarket seat belt installation???

[wwotr]

Originally Posted by mbgmike

My 2nd problen (another pic attached) is how the He** do you get the Plastic sheath off of the retracting side, to get to the Nut!!??
I see no plug whatsoever, and it is not bolted in from the bottom end underneath the floorboard!!

Its amazing how something so simple gets so hard. i think they were easier when new. They get hard I think and make it next to impossible to remove without damage.
They are truly a pain. If you had a wifes hair dryer it can soften them some.

Oh no problem there.
I'm not keeping these, so if tht's the only way, then I will DESTROY...err....I mean....gently cut that freaking sheath off.

OK problem #2 solved.

Now about those "L" Brackets....Oh and when I went to install the seat belt on the Pass side (Left side of the seat), now theres a Gas line or EAC Line, so I took about 3 washers and put them on the backside of the plate, so when I tightened it down, it wouldn't crush that tube, and it still looks like it using all the threads.

;0)