![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2002
Location: California
Posts: 971
|
Differential sweat
Can anybody give me some insight on the concave indents, four on each side, of the front diff.? I would assume they're pressed in to hold the axle housing.
The reason I ask is that they all seemed to be filled in with some type of epoxy/weld from the factory, however one is completely smooth like the filler has fallen out. The diff has been empty for over a year now with the cover on, but this one empty indent seems to sweat oil, very slow. I can wipe it and a few days or a week later I'll check it and it will have the oily film. Should it be filled? With what? Thanks The sweaty one: ![]() Wiped clean: ![]() The opposite side of the diff: ![]() Here you can see the one above it, partially filled, no sweat: ![]()
__________________
--------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ---- |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|