|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
05-13-2010, 04:58 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: Southern, Saskatchewan
Posts: 640
|
front brake problem????
I have a 1976 Chev 1/2 ton and was replacing front brake caliper and brakes cause it was seized on driver's side, passenger side is good. The problem is all new caliber and brakes replaced but I can't bleed brakes as no fluid will come out of bleed screw. I unhooked hose right at caliber and no oil will come out there either while pushing on brake pedal. There is oil in brake booster, and brake pedal is hard after about two inches of depressing. What is wrong, I'm stumped?
__________________
Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode