![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2008
Location: edmonton, alberta
Posts: 293
|
fuel type-fanning the flames
Ever wonder what kind of fuel to run in your engine? Here is a quote from an engineer below on the subject- Fuel for the discussion fire ')
***Just so you are aware, "octane" is not "power". In fact, "premium" gas (the stuff with the higher octane number) has fewer BTUs per gallon than "regular" gas. The extra power that is 'found' with "premium" gas is not a result of the gas. It is a result of higher compression in the cylinder, due to different pistons or cams. Increasing the compression ratio also increases the heat generated by compression. If the compression is raised enough, the mixture can get hot enough to ignite itself. This is called "pinging" or "knocking". Gas with a higher octane number will resist this heat better and will wait for the spark to ignite it. "Premium" gas also burns slower, so you have to light the fire a bit sooner by advancing the spark. How many of us have "advanced the spark" to get some more power? "Premium" gas and spark advance are both Band-Aids to cover the heat from the increased compression. In your stock engine, neither one is necessary. In fact, just by switching to "premium" gas, you usually lose some power and mileage because there are fewer BTUs and the fire is still burning as the piston goes down, lowering the BMEP (Brake Mean Effective Pressure).*** Sounds reasonable don't it.
__________________
![]() 76 Silverado, 2wd, long box, 350/th350, 3.42 posi, edelbrock performer 64cc heads, edelbrock 1405, 2101 intake, Hedman Headers, Comp Cam XE262 http://beerbreadbike.wordpress.com/ |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|