![]() |
![]() |
#1 |
Old Duffer
![]() Join Date: Mar 2003
Location: Maine
Posts: 1,821
|
Inline six carbs
Maybe this should go in the "Engine" section, but it's related to the "Post Your Straight Six Pictures" thread, and I didn't want to hijack that thread with a question.
Having said all that, I noticed a lot of 4BBL carbs on the engines. Some of them had the primary's facing forward, and some were facing outboard (to the left). I mounted mine with the primary's facing left because my manifold is a dual-plane, and I reasoned the primary's would service one plane, and the secondaries would feed the other. I'd like to read some idea's as to which way is better, or if it even matters, and why...... Thanx!
__________________
'68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve." |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|