![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2009
Location: Florence, Alabama
Posts: 157
|
Need advice on raising 67 C10 cab 3/4" or so...
Put a 67 cab on my 68 frame and bolted down the original 68 bed. The Cab (after I installed new poly bushings) sits about 3/4-1" too low according to my belt lines. I am trying to line up my new moldings.
Can anyone give me some good advice. Want it to be right on if possible. Can I simply raise it with grade 8 washers and longer grade 8 bolts? Once I get it the same height I'll run a straight tape line off the end of both wheel radiused molding and I should be good, right? Thanks for any help. Tom
__________________
Bamafrost "Wars fought, uprisings quelled, Coup d'Etats planned...right after my nap". '68 Rambler American 2 door post Built 340/727/8.75 w 3.73 posi '68 C10 shortie soon to have a 2.5/4 drop and new Americans: 16" x 8" chrome IROC's |
![]() |
![]() |
Bookmarks |
Tags |
bamafrost, raising 67-68 cab |
Thread Tools | |
Display Modes | |
|
|