10-07-2010, 11:33 PM | #10 | ||
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Project Vitamin C-10
Quote:
Quote:
I went out and got the tailgate fitted and all hardware installed. It couldn't have been any easier. Had only one minor problem I will discuss that later. First I centered the tailgate in the hole with bondo spreaders and a ratchet strap. I like using spreaders because they are tapered and I could fine tune the gaps. All of the hardware. Had to assy the strickers and install them in pre existing holes. Then attach the side locks. Hooked up side locks to stricker plate. Installed latches. A working tailgate. I like it!!! The only problem is the latch on the right side was hitting the taper on the stricker (pointing to it in the pic) causing the TG to shift to the left closing up the gap on the left side. I haven't fixed it yet. There was a shim under the latch, but I removed it and installed a thinner shim. It helped, but not enough. 2 more pics on the way.
__________________
Alan
Philippians 2:14-16 |
||
Bookmarks |
Tags |
1959, 1960, 1964, 1965, 1966, c10, hugger, impala, orange |
Thread Tools | |
Display Modes | |
|
|