|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
10-15-2010, 12:10 AM
|
#1 |
|
MOTORHEAD!
Join Date: May 2000
Location: Devon AB, Canada
Posts: 849
|
Broke the seatbelt bolt!!!
I was removing all of the interior in my 82 and the hardest bolts to remove were for the seatbelts. It was almost like they had been loctite'd at the factory! Anyways, I broke the drivers side bolt off. I soaked it with a bunch of release-all for three days straight just praying that when I went to drill through it that it would catch and spin out. It didn't!!!!! What should I do? Use an easy-out and try to pull the bolt out, or drill it to the correct size before re-tapping to 12mm??
__________________
82 GMC High Sierra VortecPro 496 12 Bolt, 3.42's AFR 265 Holley 850 Performer RPM Air Gap Hooker 2455's TCI Turbo 400 Super Street Fighter TRRC 12 Bolt Eaton Posi Mark Williams Axles Cal-Tracs Hoosier 30x10.5 Radial Slick Full weight long box pickup Current best- 11.33@117mph |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode