Metric power steering pump question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

polevault1977 · 06-15-2003, 09:07 PM

Hi All, I just put on a serpentine belt system, 92 factory, on the 67 i'm building. I'm going to run the old steering box, double flare fitting, and an O-ring pump fitting. What is the best way to come up with the pressure hose? Do they have an adaptor, or just cut of a newer hose and put the nut and a double flare on it, or any other routes to go? Your thoughts appreciated. I'm sure several of you are running metric pumps with old boxes!. Thanks, Danny

06-15-2003, 09:07 PM	#1
polevault1977 Pick'n up the pieces! Join Date: Sep 2002 Location: Marietta, Oklahoma Posts: 198	Metric power steering pump question Hi All, I just put on a serpentine belt system, 92 factory, on the 67 i'm building. I'm going to run the old steering box, double flare fitting, and an O-ring pump fitting. What is the best way to come up with the pressure hose? Do they have an adaptor, or just cut of a newer hose and put the nut and a double flare on it, or any other routes to go? Your thoughts appreciated. I'm sure several of you are running metric pumps with old boxes!. Thanks, Danny

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.