Flames through the CARB !!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

remist17 · 11-13-2010, 04:14 PM

Guys and Gals need some help

Just tried starting a 383 storker project and the motor runs for about 3 seconds dies. Starts back up runs 2 seconds dies, then just cranks and flames come from the carb.

Checked all wires and they are running correct. Setup timing to be 0 and went all th way up to 12 deg. Still doing the same. Getting about 5psi of fuel pressure. Pulled the bowl and foud #65 jets in the carb.

My setup
383 stroker
280H Comp Cam
Vortech heads
Airgap edelbrech intake
4160 Holley Carb
HEI dist.
ALL new never ran.

Please help me out, any suggestion on how to make the engine run and without flames.

11-13-2010, 04:14 PM	#1
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Flames through the CARB !!! Guys and Gals need some help Just tried starting a 383 storker project and the motor runs for about 3 seconds dies. Starts back up runs 2 seconds dies, then just cranks and flames come from the carb. Checked all wires and they are running correct. Setup timing to be 0 and went all th way up to 12 deg. Still doing the same. Getting about 5psi of fuel pressure. Pulled the bowl and foud #65 jets in the carb. My setup 383 stroker 280H Comp Cam Vortech heads Airgap edelbrech intake 4160 Holley Carb HEI dist. ALL new never ran. Please help me out, any suggestion on how to make the engine run and without flames. __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops. Last edited by remist17; 11-13-2010 at 04:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.