Just got the engine in on Sunday, Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DT1 · 12-07-2010, 11:30 AM

It took a while but the engine and transmission are rebuilt and installed. While I had them out I had some time to clean up the engine compartment. The engine got an RV cam and the deck shaved a bit. I also did some mods to the Rochester.
The TH350 trans got a five clutch pack and B&M shift kit.
I know it's not as clean as a lot of stuff I see on this forum but it's intended to to be driven in any and all conditions.
BTW...If any of you need the name of a good machine shop in the Los Angeles area, I can finally recommend one.

12-07-2010, 11:30 AM	#1
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Just got the engine in on Sunday, Pics It took a while but the engine and transmission are rebuilt and installed. While I had them out I had some time to clean up the engine compartment. The engine got an RV cam and the deck shaved a bit. I also did some mods to the Rochester. The TH350 trans got a five clutch pack and B&M shift kit. I know it's not as clean as a lot of stuff I see on this forum but it's intended to to be driven in any and all conditions. BTW...If any of you need the name of a good machine shop in the Los Angeles area, I can finally recommend one. Last edited by DT1; 12-07-2010 at 11:31 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.