I have a CPP booster/MC and their tranny crossmember. The brackets on the booster/MC badly interfere with the crossmember. The booster combo has the standard bracket that mounts in the stock frame location which works fine. It also has a bracket pointing forward (it's the bracket pointing diagonally from top right to bottom left) that will work fine but the two rear facing brackets hit the crossmember and I'm not sure what to do. This pic is a top view of the booster.
Do you think it will be stable enough to just cut those rear facing brackets off? I kinda think not because most of the weight is at the rear. Just need some ideas because I'm stumped.
Thanks,
Jeff