Interference: brake booster and CPP crossmember, please help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrDude_1 · 12-15-2010, 11:01 AM

oh, and as for the original topic:

no one ever said the transmission crossmember has to go straight across the frame.
theres nothing wrong with making one that bends and attaches several inches back on one side then the other.. remember, the crossmember is not there to keep the engine from tipping side to side, its there to hold the tailshaft at a given height, and hold the engine/trans centerline to the truck.

12-15-2010, 11:01 AM	#24
MrDude_1 Registered User Join Date: Aug 2010 Location: Charleston, SC Posts: 311	Re: Interference: brake booster and CPP crossmember, please help! oh, and as for the original topic: no one ever said the transmission crossmember has to go straight across the frame. theres nothing wrong with making one that bends and attaches several inches back on one side then the other.. remember, the crossmember is not there to keep the engine from tipping side to side, its there to hold the tailshaft at a given height, and hold the engine/trans centerline to the truck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.