The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-02-2011, 10:51 AM   #1
Flatbed136
Registered User
 
Join Date: Dec 2010
Location: Jesup,Iowa
Posts: 45
307 Oil pressure & temp sending units

Please bare with me as I explain this as I'm a green horn.

As you can see from the picture, there is currently an after market set of guages.

I would like to hook the factory gauges back up.

The guy I got the truck from told me I had 327 heads. I ran the casting numbers from the head on the drivers side and it shows it is a 350.

Casting number is 333882. I have not looked at the other one.

What size threads or sending unit will I need for the temp guage?

The block casting numbers show it is either a 307 or 350. Was told since it has a thin or smaller harmonic balancer than more than likely it is a 307.

What size threads or sending unit will I need for the oil pressure?

The oil pressure is currently located by the distributor with a plastic line.

Any help and information would be greatly appreciated.

Thanks for your help.
Attached Images
  
Flatbed136 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com