Lowering blocks with 15" wheels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loridr · 01-04-2011, 07:59 PM

Still thinking about what to do with my rear suspension. I'm satisfied with my 4/5 drop.

Current setup is 5" rear springs without relocating shocks or doing a notch and I’m running the stock panhard bar.

Can I run 2" lowering blocks with 15" wheels?

If so, and I switch to 3" springs, that setup would eliminate any need for a notch, I could use the stock panhard bar and I wouldn't really need to relocate the shocks either, correct?

01-04-2011, 07:59 PM	#1
loridr Registered User Join Date: Dec 2010 Location: Harrisburg, Pennsylvania Posts: 38	Lowering blocks with 15" wheels? Still thinking about what to do with my rear suspension. I'm satisfied with my 4/5 drop. Current setup is 5" rear springs without relocating shocks or doing a notch and I’m running the stock panhard bar. Can I run 2" lowering blocks with 15" wheels? If so, and I switch to 3" springs, that setup would eliminate any need for a notch, I could use the stock panhard bar and I wouldn't really need to relocate the shocks either, correct?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.