New Guy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 07-06-2003, 02:09 PM

6K is quite a bit of cash, but if the dude is going to take it apart, and bead blast it, it sounds about right.
A proper paint job on these trucks takes quite a bit of labor, the inside of the cab needs done, the bed needs to come off, the windows need to come out, fenders removed...ect.
I would insist on seeing more than one of his previouse jobs, and talk to some customers and get there opinion on the quality of work.
You could get by for much less, it all depends on what you are wanting to look like in the end.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-06-2003, 02:09 PM	#26
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	6K is quite a bit of cash, but if the dude is going to take it apart, and bead blast it, it sounds about right. A proper paint job on these trucks takes quite a bit of labor, the inside of the cab needs done, the bed needs to come off, the windows need to come out, fenders removed...ect. I would insist on seeing more than one of his previouse jobs, and talk to some customers and get there opinion on the quality of work. You could get by for much less, it all depends on what you are wanting to look like in the end.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.