|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-01-2011, 05:56 PM
|
#1 |
|
someday
 
Join Date: Dec 2001
Location: canastota,new york
Posts: 629
|
blazer tub tippers/cart
I have had a couple people ask me about these so i figured i would post some pics and measurements. This idea came from a pic i saw on here but i dont remember the user to give them credit. These are made from some scrap stock i had. The bottom part of the "L" is 3x3" square tubing. The stuff i have is from a grocery store shelve support it is very rigid but only 3/16" or so wall thickness. The side of the "L" is 1x2" tubing. The casters are from harbor freight and have about a 4" wheel. The tubes that the tub sits on are exhaust pipe. I used a cherry picker hooked with a nylon strap to tip it up. You will want a couple helpers to slow it from tipping to fast once the weight shifts.
__________________
Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode