![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
97' Tahoe 2dr/2wd
Join Date: Jul 2002
Location: Huffman,TX
Posts: 1,168
|
inline tube, problems with disc brake conversion...
was tring to put brake lines on my truck today, (70 chevy, 1/2 ton swb, coil spring)
i bought a set from inline tube, a manual disc brake line conversion set, and the bracket for the proportioning valve. i had already put the long line under the frame back to the rear hose, and put the lines on that are for the front calipers, i went and got a master cylinder for a 71 with disc. and bought a new proportioning valve for a 71 with disc today also. anyhow, the 2 lines going to the proportioning valve from the master cyl, and the 2 that exit from it, i can't figure out how they route. the kit moves the proportioning valve from the stock location, and moves it directly under the master cylinder at an angle, the lines just don't seem right. anyone else use this kit? anyone have any pictures? i tried to call technical support at inline tube but they are already closed for today. any help would be nice. thanks tommie |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|