67 short step , what to do?

[doosekoop]

Ok here is the deal , there are just so many options available i think my head may explode!
I decided that even though this is all over the forum im gonna just ask for suggestions
on which way i should go. For starters i have acquired a 67 shortbed stepside 6cyl 3spd
column w no power steer or brakes.

I want power discs , power steering , 4/5 drop , i have a 350 / 350 and i know i will
need to find a taller rear or go with an overdrive.

options available for a poor guy on a budget! ive read the conversion chart but it says
nothing about using 73 to 87 power steering box with 67 crossmember / a-arms / 73-87
spindles , rotors , calipers , cross joints. does the idler bolt up in the same place
as 67 ? 6 lug or 5 lug ?

just want to get the right setup without braking the bank. I would love to buy all
new stuff from the aftermarket but finances prevent that so im lookin for a used beater
for parts or a parting truck.

this is where im starting from! what should i do??

[IMG][/IMG]