GA WTT - Brand New set of 13" wilwood disc breaks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

funkytechmonkey · 08-14-2011, 01:54 AM

SOLD

Here is the set of breaks... I bought them from summit and they sent me the wrong set. I waited too long to send them back and now I am stuck with them. They were mounted for about and hour and taken off. These are the flat rotors NOT the drilled and slotted. I paid over $700 for them brand new. Shipping is around $30-40 in the lower 48. They are all boxed up and I can ship.

Here is the link from Summit.
http://www.summitracing.com/parts/WI...094D/?rtype=10

Let me know if you have any questions.

08-14-2011, 01:54 AM	#1
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	WTT - Brand New set of 13" wilwood disc breaks SOLD Here is the set of breaks... I bought them from summit and they sent me the wrong set. I waited too long to send them back and now I am stuck with them. They were mounted for about and hour and taken off. These are the flat rotors NOT the drilled and slotted. I paid over $700 for them brand new. Shipping is around $30-40 in the lower 48. They are all boxed up and I can ship. Here is the link from Summit. http://www.summitracing.com/parts/WI...094D/?rtype=10 Let me know if you have any questions. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build Last edited by funkytechmonkey; 01-05-2012 at 11:51 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.