|
08-16-2003, 10:19 AM
|
#1 |
|
Registered User
Join Date: Apr 2000
Location: Peru,NY
Posts: 183
|
Pulling Problem !!
I put a set of 6 lug wagon wheels off a early 80's chevy about a month ago. Not long after it began to pull to the left when the brakes are applied.So I figured the wheel cylinders or brakes were in need of replacement.I replaced both front and rear wheel cylinders ,and it still pulls real hard to the left. I swaped left and right front tires still pulls ! While I had the wheel cylinders off I flushed the system and used silicone brake fluid instead ,I have blead and blead the system for air on the right side and nothing!I had the front wheels off when I bled them ,so I know that the right side is working.What am I missing here !!Is it simple or complex ! Today I may try the old narrower wheels and tires back on the front to see if it makes a difference. Sorry fo the long post ,I am getting discouraged !
__________________
Where Am I ? How did I get Here ?  1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact . |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode