Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-28-2011, 08:32 PM | #1 |
Salty Sailor
Join Date: May 2009
Location: Savannah, Ga
Posts: 603
|
3/4 ton -vs- 1/2 ton question
okay so recently i have finally found out from 1000 miles away why my lower control arms will not center up on the k frame. and it left me thinking if Rock Auto really skrewed up the lower a arms or if the "holes" in the lower control arm shaft are spaced further apart on a 3/4 ton than they are on a half ton.
because thats why my lower a arms have to come off and i have to pressure wash, paint, put new bushings, and transfer the balljoints into my original lower control arms.... i would just switch the shafts but the way they are connected to the control arm is different than the original. if yall recall from my build thread i had to modify the shock mounts to get the shocks to fit also. Rock Auto will be recieving a nasty letter from me once this is all resolved.
__________________
86 c-10 Custom Deluxe Savannah, Georgia |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|