Upper Control Arm Spacer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

creepdogg · 10-10-2011, 09:46 AM

I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

10-10-2011, 09:46 AM	#1
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Upper Control Arm Spacer I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.