11-20-2011, 07:20 PM | #1 |
Registered User
Join Date: Mar 2007
Location: Medford Oregon
Posts: 26
|
Carb help
I have a '69 C10 with a 350 and it's an automatic. It is stock except for the Accel Points Eliminator kit and the upgraded coil they suggested. It has the quadrajet 4 barrel that I rebuilt, fresh plugs and wires.
Since I did the tuneup it runs terrible. That's why I rebuilt the carb. That didn't help so I put in the points kit. I have rebuilt a few carbs and I feel good about that, in fact I picked up another one from Craigslist and compared inside and out. I am even more confident that it is right. I am also positive that I did the points kit right. It was pretty easy and it wouldn't start if I hadn't done it right. The timing is right on, no vacuum leaks anywhere. The fuel/air screws don't do anything when I turn them. I can turn them all the way in and nothing *Also, when I step hard on the gas, it really bogs down and almost dies. If I drive it normal, it will run but just barely.* Any help would be SO appreciated.* Posted via Mobile Device |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|