![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#2 |
Not Dusti,just Bob
Join Date: Jul 2002
Location: Camas,Wa
Posts: 247
|
![]()
They look like alternator brackets because that is what they are,the power steering pump bolts onto the top of it with another bracket.
JJR posted some pics on the parts board of three differant setups.the one on the right side looks like the brackets you are talking about,there are 3 pieces to that setup. That is what I used on my truck,the alternator bracket would not bolt up to the head,it hit the exhaust so I cut off the part of the bracket that bolts it to the head. What was left of the bracket I bolted right onto my old alternator bracket. Bolted the pump onto that bracket with the pump bracket then I had to make a brace that goes from the front of the pump to the front of the head. And had to put on a 2 groove water pump pully. Bob W
__________________
72 cheyenne super 1/2ton 89 camaro |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|