Pulled my tranny - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hopped up · 03-09-2012, 08:47 PM

Pulled my tranny cuz Ive been trying to find out why I keep going thru starters. I decided it must be be a problem with my flywheel. I didn't put the motor/tranny in. It was just sitting there. Anyways there's a bolt missing and all but two of the bolts were loose. I assume I found my problem. I'm still gonna put in a new flywheel and quality flywheel bolts. Any suggestions? Loctite? What's the torque! Arp bolts!any help will be appreciated,also gonna install a shiftkit(b&m) should I do 1st stage or 2nd? It's just a driver and to have fun in.thanks
Posted via Mobile Device

03-09-2012, 08:47 PM	#1
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Pulled my tranny Pulled my tranny cuz Ive been trying to find out why I keep going thru starters. I decided it must be be a problem with my flywheel. I didn't put the motor/tranny in. It was just sitting there. Anyways there's a bolt missing and all but two of the bolts were loose. I assume I found my problem. I'm still gonna put in a new flywheel and quality flywheel bolts. Any suggestions? Loctite? What's the torque! Arp bolts!any help will be appreciated,also gonna install a shiftkit(b&m) should I do 1st stage or 2nd? It's just a driver and to have fun in.thanks Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.