Project truck dream 65"

[lenguini]

Both divots at the top tail light panels for the old tail gate chains were welded and filled.I noticed on some trucks this has not been done and I felt it looked unfinished.
Drives/passenger box seams and tail light panels were welded and smoothed for a more finished appearance,not to mention nowhere for moisture to enter any longer.Now the box sides look and are one piece.
Also to help anyone who wanted to do this is a couple pics closer up of the fuel filler tube and where the cut was made in the rear cross sill.The vent tube is welded to the filler tube and both welded into their final determined location at the rear cross sill mounts.

Now that the box is complete,I will be moving back to the front of the truck and focusing on rad support,inner fender,.....etc. bodywork !