running into snags on DB conversion... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boraxman · 09-28-2003, 04:06 PM

What im doing is switching to 71-72 spindles on a 70 c10. Ive changed upper and lower ball jonts to match and bought outer tie rod ends. This is where things are getting difficult. Seems the outters have bigger threads so it looks like I will need inners and the collar that connects them. Will the new inner tie rod ends fit into the bar that connects the two sides together? If not will the center bar off 71-72 fit in a 70? Thanks for any words of wisdom.

09-28-2003, 04:06 PM	#1
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	running into snags on DB conversion... What im doing is switching to 71-72 spindles on a 70 c10. Ive changed upper and lower ball jonts to match and bought outer tie rod ends. This is where things are getting difficult. Seems the outters have bigger threads so it looks like I will need inners and the collar that connects them. Will the new inner tie rod ends fit into the bar that connects the two sides together? If not will the center bar off 71-72 fit in a 70? Thanks for any words of wisdom. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.