400" 4-Bolt with .030" over Forged TRW's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GSXMEN · 10-01-2003, 11:52 PM

I have a 400" 4-bolt main shortblock with the following done to it:

*.030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads]
*400" crank turned .010"/.010"
*400" rods resized
*Pistons installed on rods
*Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268* Lift: .450" w/1.5 ratio]
*New cam, main, rod bearings & rings
*Cam bearings installed

**Price $1000 plus shipping**

Price reduced to $800 - $750 without cam

10-01-2003, 11:52 PM	#1
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	400" 4-Bolt with .030" over Forged TRW's I have a 400" 4-bolt main shortblock with the following done to it: .030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads] 400" crank turned .010"/.010" 400" rods resized Pistons installed on rods Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268 Lift: .450" w/1.5 ratio] New cam, main, rod bearings & rings Cam bearings installed Price $1000 plus shipping Price reduced to $800 - $750 without cam __________________ Scott Last edited by GSXMEN; 10-25-2004 at 03:59 PM. Reason: Price Change

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.