MO 1967 SWB Project / Part out

[Terrell_Extremes]

Sorry, for the ones that was looking for parts off the truck. I had been out of town off and on for several days for work. Without a chance to get on here and let everyone know. That the truck has SOLD. We do have these parts left for sale. I have some PMs with guys interested in parts. They are first in line.

Here is the list of what is left:

Let me know if your interested and I will shoot you a price

brake booster for disc front/drum rear w/portioning valve, aluminum gauge insert w/shark gauges, CPP tubular transmission mount, CPP tubular motor mounts, CPP fuel sending unit, CPP in bed fuel fill w/ clamps and hose, stainless steel braided transmission dipstick tube, box full of new heater parts, split seats out of 98 chevy truck(has seat belts on seats already) w/center arm rest, used turbo 350 transmission, 2/4 drop kit

Engine: Everything New. Block is a 400 sbc, bored .030 over, 509 block(very good block)
200cc Aluminum heads, 64 cc w/ steam holes, 2.02/1.60 valves, hardened valve seats, bronze guides, plus .400 thick deck for severe uses, valves are one piece forged stainless steel, springs are good to .500 lift,
polished aluminum timing cover, Erson- flat tappet hydraulic lopey cam, aluminum 1.5 ratio 3/8 stud roller rocker arms, ARP intake bolts, matching intake gaskets, new head bolts w/washers, Crosswind dual plane street and strip aluminum intake, complete engine gasket, matching 5/16” .065 wall pushrods, hydraulic flat tappet lifters, cam lock plate, aluminum tall valve covers, aluminum valve cover breathers, noisy gear drive timing set, aluminum water pump, chrome mechanical fuel pump, oil pump kit, Clevite main and rod bearings, 400 sbc balancer, chrome 1 wire alternator, .030 flat top pistons w/rings, aluminum polished finned oil pan, forged 5.7 bushed rods, ceramic coated headers, Quick fuels braided fuel kit, Quick fuels 4 barrel 600 cfm carb, 31x19 alumimum radiator, Eagle steel crank, HEI distributer,

Again sorry for any inconvience.

Tim