Energy Suspension Body Bushings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURG · 07-16-2012, 10:29 PM

Anyone run these on their 60-66? The kit Part# 3-4137 comes with 1/2" bolts and washers for the rear two cab mounts and my stock ones are 7/16" My stock bolts could be re-used, but I shouldn't have to. The rear bolts screw up into a captivated nut in the floor so they have to be 7/16" This means all the washers and spacers for the rear set are oversized too. Again not a big deal as it is only a 1/16" but the kits should be correct for the 50.00 you spend on them.

07-16-2012, 10:29 PM	#1
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Energy Suspension Body Bushings Anyone run these on their 60-66? The kit Part# 3-4137 comes with 1/2" bolts and washers for the rear two cab mounts and my stock ones are 7/16" My stock bolts could be re-used, but I shouldn't have to. The rear bolts screw up into a captivated nut in the floor so they have to be 7/16" This means all the washers and spacers for the rear set are oversized too. Again not a big deal as it is only a 1/16" but the kits should be correct for the 50.00 you spend on them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.