![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2001
Location: Brookdale,Ca
Posts: 35
|
Quadrajet install gasket help!
I have a 68 C20, stock 327 intake manifold, and Quadrajet 4 barrel (7042220).
I need help determining the gasket/heat shield/spacer set up. 1) The manifold has a channel across the front of the primary holes, the gasket has a cut out for that channel, but the heat shield does not? Huh? I know the heat shield sets on the manifold first, so why the cut out in the gasket? 2) The Qjet originally had a 1/4" spacer/gasket between to it and the manifold. A carbon type heat sink spacer thingy w/ paper gaskets on each side. Is this a necessary requirement to keep the carb/mixture cooler? 3) Finally, the Qjet underside, towards the very front, has a small channel. It is isolated from the primary ports. Should that be covered by the gasket? I believe it originally was? Thanks! (i tried to attach pics) |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|