If anyone cares. 67 68 CST horn button repair

[j ripper]

I started a thread last night asking if anyone repaired or replaced the plastic ring on these buttons due to broken teeth.Not too much help, so today at work I had a thought. I'm sure this has been done before. I'm pretty stoked how it turned out. Back yard basics at its best. You will have to sacrifice a 69 and later button. (darn)

Step 1. Cut off ring. Roughly 5/16 or so from bottom of teeth.


Step 2. Cut same amount off of 69 and later button. I taped a line then spray painted then removed tape for my line. The cuts were made with a hacksaw.



Step 3. Get out some 5 min and mend the two together.


Step 4. Slap it on. Just like downtown!!!

Posted via Mobile Device
Posted via Mobile Device