my 66 C60

[jonzcustomshop]

Originally Posted by MrBeast

Cool truck. I would strongly suggest you look at putting 19.5's all the way around on it, that will lower it significantly.

I am sure it is going to come in very handy for years to come.

Originally Posted by MrBeast

You may look at getting some Banjo Eyes A&W direct has them they are very handy for securing a car.

Also transport chains are a good investment. You weld the banjo eyes into the back of your bed, then you cross chain with the transport chains to the car.

A V bridle is also a good investment to consider for your winch, it will give you two points of contact on the frame and it will keep the pull on winch in the center line which will help the line spool around the drum correctly so it is not prone to bunching up at one end.

Doing what you do this video may also interest you.

https://www.youtube.com/watch?v=xejMKLck_r0

That unit is pretty cool because it can load vehicles with very low ground clearance with out worrying about wood blocks and what not.

thanks for all this, def. some options I should look into.

do you have a link, or pic of the 19.5 wheel idea you mentioned?

wonder what havoc smaller tires would play with gear ratio and such..?