![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Aug 2010
Location: NH
Posts: 368
|
1967 3 Hole Speedwarning Dash
Well, wasn't going to get rid of it... But I don't really forsee myself buying a '67 anytime soon, and so maybe someone on here would like to buy this original '67 speedwarning dash....
![]() ![]() ![]() I have the original buzzer that goes with the dash (can get photo if needed), but I have no way to test it so it's sold as-is. The knob on the dash doesn't turn the speedwarning needle easily, but if you mess with the cable on the back, it will turn the needle so it's not stuck or anything. Probably just needs to be cleaned. The knob is cracked, and the needles are faded as you can see. The bezel itself is not the greatest- usual cracks around the screw holes, and faded lettering for light, choke, etc. The silver around the edge of the bezel is in decent shape, with some wear and tear. Would look pretty good in an original/patina style truck. The date on the back is '66. There doesn't look to be any burnt spots on the ciruit, or any real bad seperation between the layers. Some surface rust on the top of the tin, but nothing bad. Has the original brass pin on the back, and the circuit has the cut-out for it so it is definately an original speedwarning dash.... Don't really have to sell it, but figured someone on here might be looking for one for their '67. I know I've never seen another one.... $300 Shipped.
__________________
- 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car Last edited by Shaun1162; 12-22-2012 at 11:49 PM. |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|