Soon, hopefully when I can get $$$$ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

miket · 10-28-2003, 12:21 AM

I will be replacing the intake manifold aluminum heads and cam in my ZZ502. I will most likely put them on ebay...

I will put them on the parts board here to see if anyone wants them but I am going to be looking to get as much out of them as I can to help fund the replacement parts.

The heads are edelborck RPM's with 2.25/1.88 valves, 110 CC chambers and ARP studs/ guideplates. They have 500miles on them. The manifold is an Edelbrock RPM as well and is port matched to the heads. The cam will be going as well.

10-28-2003, 12:21 AM	#1
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Soon, hopefully when I can get $$$$ I will be replacing the intake manifold aluminum heads and cam in my ZZ502. I will most likely put them on ebay... I will put them on the parts board here to see if anyone wants them but I am going to be looking to get as much out of them as I can to help fund the replacement parts. The heads are edelborck RPM's with 2.25/1.88 valves, 110 CC chambers and ARP studs/ guideplates. They have 500miles on them. The manifold is an Edelbrock RPM as well and is port matched to the heads. The cam will be going as well. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.