OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More

[MoreLoveThanMoney]

Originally Posted by toyplumbertrucks

I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts.

Heres what I can offer you. I have a converted 2wd blazer. I have all of the 4wd brackets that came off of it but I do not have the front axle. I do have a nice passenger side but I alsohave an entire blazer tub. I can send you a link to the photos of it. It has a title and is an a/c dash. You could use those sides on yours and sell the rest or use the whole tub. Your choice. Let me know what you think and I can get you pics and we can talk price.

Originally Posted by Brianhill6

Do you have any rear wheel wells?

I have one or two sets left. I know they do not have rusted lips but may have a couple of bruises. The set is cheap but the shipping is not. I shipped a pair to somone else and it seems like it was around $30 to ship. Without checking on freight, I would be around $60 for a pair shipped.