71 tie rod taper? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tinsmith · 01-09-2013, 11:40 PM

Hi guys
I recently switched to 71 drop spindles, and as you guys know the inner tie rods are different. I went with the CPP billet tie rod sleeve so the conversion sleeve is not an option. I have searched locally for a 71 center-link to no avail. which leads me to my next question I am looking to purchase a tie rod taper reamer to fix the current one I have now. Does anybody know the taper of tie rod, there seems to be a few different GM tapers. Any help would be appreciated.
Thanks Jon

01-09-2013, 11:40 PM	#1
Tinsmith Registered User Join Date: May 2009 Location: FSJ, B.C. Posts: 28	71 tie rod taper? Hi guys I recently switched to 71 drop spindles, and as you guys know the inner tie rods are different. I went with the CPP billet tie rod sleeve so the conversion sleeve is not an option. I have searched locally for a 71 center-link to no avail. which leads me to my next question I am looking to purchase a tie rod taper reamer to fix the current one I have now. Does anybody know the taper of tie rod, there seems to be a few different GM tapers. Any help would be appreciated. Thanks Jon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.