1951 Chevy / C4

[xpickup]

swizzlestick, No problem and thank you. I let the headlight buckets at the factory location. I use the 56 trim ring around the head light for the placement of the panel. I just level up the panel. Then lay a straight edge across the panel and the top of the fender and roll the patch panel out till it fits nice. Then cut slices in the fender to pull the front of the fender up to meet the patch panel. The fender rolls down so that is why you need the slices . You have to make a panel to finish off the underside of the patch panel to the fender above the headlight bucket. It is a lot of work but it is a nice subtle change.


Shannon