Transmissiin linkage help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusty69 · 06-10-2013, 01:37 AM

I am getting a borg-warner 4 speed from a Chevy car to put in the rusty 69. I have a friend that has all the pedal set and linkage stuff from an 80s Chevy truck. My question is, is the 80s stuff the same as the 67-72 stuff or can it be made to work? Also, a hydraulic throwout bearing kit is about $100. What are the thoughts on that route. I browsed through the forum to see if the linkage question had been asked but didn't find anything. Thanks for the help.
[size=1]Posted via Mobile Device[/siz

06-10-2013, 01:37 AM	#1
Rusty69 Registered User Join Date: Jun 2013 Location: Wetumpka, al Posts: 76	Transmissiin linkage help! I am getting a borg-warner 4 speed from a Chevy car to put in the rusty 69. I have a friend that has all the pedal set and linkage stuff from an 80s Chevy truck. My question is, is the 80s stuff the same as the 67-72 stuff or can it be made to work? Also, a hydraulic throwout bearing kit is about $100. What are the thoughts on that route. I browsed through the forum to see if the linkage question had been asked but didn't find anything. Thanks for the help. [size=1]Posted via Mobile Device[/siz Last edited by Rusty69; 06-10-2013 at 01:39 AM. Reason: Dang auto correct

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.