Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-13-2013, 05:40 PM | #1 |
Registered User
Join Date: Oct 2012
Location: San Diego, CA
Posts: 117
|
need help with bedwood.
Here is my problem. I am trying to replace the bedwood in my 55 series 1. I ordered a drilled kit of oak bedwood. The box that arrived is clearly marked as a kit for a 54-55. However, the drilled pieces of the kit are very different than what is currently on the bed. I suspect that the kit was not labeled correctly but I need help to confirm that (either that or my bed is screwy).
Here are the questionable pieces that the kit contained. There are no holes drilled in the pieces that should mount to the angle irons and there are 4 holes drilled inline on two of the wider sections. Here is the configuration on the bed currently. There is a single hole on the forward part of second board and the remaining holes are drilled into the board mounting to the angle iron. Thanks in advance. The company's tech department isn't open until Monday and I'd like to be able to explain the situation as clearly as possible when the time comes. Tim |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|