6 lug to 5 lug.....'64 C10

[McCoyAZ]

So instead of swapping out a complete rear differential I decided to just pull the axels and weld up the old 6 lug configuration and have the axels re drilled to a 5 on 5 bolt pattern.

What I would like to know is:

Since I am pulling the axels, I assume I should replace the axel bearings and seals and want to know what else I should look at changing while I have this all apart?

New 5 lug drums, new brake pads, replaced the rear brake cylinders.....

anything else need to be addressed??