The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-28-2013, 12:10 PM   #1
Atommik
Registered User
 
Atommik's Avatar
 
Join Date: Sep 2011
Location: Golden Valley,MN
Posts: 639
turn signals

1951 1/2 ton chevy, GM tilt column, EZ wiring harness.

Everything is hooked up but the turn signals will not work. Fuse is good, flasher is good. I 've got power at the flat wide column connector for the horn, brake lights and hazard lights. None of the turn signal wires have power with the key on. I took apart the turn signal switch and that looks good. Both power wires going into the column at the ignition switch have power. Bad ign switch? Truck starts fine. Does one power wire from the ign switch go to the starter and the other power the turn signals in the "on" position?

Am I getting close here??
Atommik is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com