C20 drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C20 · 09-01-2013, 04:54 PM

I tried to order a disc conversion with a 2.5 inch drop spindle from Classic Performance and was informed that it was no longer an option. They did have the stock height conversion but that was it. Does somebody out there offer a drop spindle for a 68 C20? It can convert to disc or not. If there is not a spindle drop what is everybody else doing to drop their 20 and still keeping a decent ride. This is my daily driver so I don't want to go any lower than 3 inches drop on the front.
Posted via Mobile Device

09-01-2013, 04:54 PM	#1
68C20 Registered User Join Date: May 2009 Location: Helena, AL Posts: 86	C20 drop spindles I tried to order a disc conversion with a 2.5 inch drop spindle from Classic Performance and was informed that it was no longer an option. They did have the stock height conversion but that was it. Does somebody out there offer a drop spindle for a 68 C20? It can convert to disc or not. If there is not a spindle drop what is everybody else doing to drop their 20 and still keeping a decent ride. This is my daily driver so I don't want to go any lower than 3 inches drop on the front. Posted via Mobile Device __________________ Russ 68 C20 long bed Stepside Daily Driver 64 Oldsmobile Dynamic 88

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.