Working on a Chevy '56 Stepside...
I was just looking at the position of the inner fender bracket on the driver side... I welded in a new floorpanel in that area. I'm pretty sure, I took the measurements of the old board, to drill the 2 holes ... but when I compare the driver to the passenger side, I have the impresion the driver side is way off ...
Is there anybody, who could measure the position of these 2 holes ? As a reference I took the ribs left and right :
on the left I have a hair less then 1", and on the right 2" 15/16 ...
many thanks in advance ...