Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-20-2013, 10:13 PM | #1 |
Registered User
Join Date: Apr 2013
Location: Gainesville, TEXAS
Posts: 658
|
body trim sell-off extravaganza
I’m ready to thin down some more parts that I won’t be using.
What I will show pictures of will be all of the body side moulding trim that I have. There is 2 incomplete sets of Suburban upper trim, I will sell them off by the piece, or otherwise. And I have a lot of 69-72 upper and lower moulding pieces for long bed and a few pieces for a longhorn in various conditions. Some have the attach clips some don’t. And the really bad stuff will donate the clips to the better stuff. And what doesn’t sell will most likely end up in my aluminum recycling tub. I do have the bed trim set for a 68 long bed, condition is kinda good, but some screws have been installed through them. Look at the pictures many of them are labeled so it will keep the confusion to a minimum. I usually go first one to inquire about a part gets first dibbs at it and then second call get's a chance if the first one declines to buy it etc. If your first to ask about a part and then you try to bargain with me over my price, and if someone posts interest in it I’ll deal with them and see what kind of deal we can make. All shipping is extra, and I would like to have several orders made before I go to the post office or other shipping service to get quotes on shipping. So I might not get it quoted or shipped for a couple of days. I do have work that I have to do this around. And larger parts can be shipped, but shipping them is a pain, and making boxes or crates does cost me. So picking up the larger stuff is always preferred. Plus keep all inquiries on the thread. And we will PM after the deal is made. And on paypal payments above $20.00 there will be a 3.045% add on for their take of the transaction. Money orders and cash are good alternatives as well. Attention everyone:[COLOR="DarkOrange"] Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request. And again all shipping is extra. If that minimal cost will break you it might just break me. Plus I have to get the shipping materials to get the parts to you, so that should be fair. Thanks Now for some parts and prices: Suburban upper trim Some of them have overspray on the lower edge, but it appears with a little time the paint will rub off, and all of it appears to polish up nicely. All the trim is in good driver condition, some small scratches, dents and dings, and the long ones have a little bend/bow to them but once installed it won't be an issue. LH rear 1/4 trim sold RH rear 1/4 trim $42.00 (1 available) (w/o attach hole) RH front door trim sold RH rear door trim sold Tail gate hatch trim sold Barn door trim RH & LH pieces sold RH & LH rear corner piecessold I have a qty of 27 (twenty seven) of the push in spring clips for suburban upper trim in good complete used condition. all sold And a qty of 5 (five) of the threaded type clips for suburban upper trim in good complete used condition. all sold Now for the rest of the trim: Some of the trim is in good driver condition some is not all that good, some small and some large scratches, some dents and dings, some are bent, some the paint or woodgrain is good condition others are not. Please inquire. Prices will range from $12.00 on the real nice stuff to $5.00 for the not so good stuff. When inquiring reference the number by the trim so I know which one your looking at. pictures #1 & 2 LH 1/4 trim more pictures to follow:
__________________
1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy Last edited by tlcrz1972; 11-28-2013 at 12:03 PM. Reason: clr$sldsld |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|