not starting-no power to starter selenoid - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nrb's70gmc · 02-23-2014, 10:35 PM

Well the title pretty much sums it up
Yesterday I moved my truck (70 gmc) to leval ground to top off the fluids
Went to start it up to move it and nothing happened

Thought it might have been the ignition switch so I bought a new one and put it in and nothing. (Acc-on) work fine but nothing when you turn it to start.

I'm getting power to the (remote ford style) selenoid (then down to the starter) but the power wire from the ignition to the selenoid is not getting power(when turning the ignition)
At the selenoid or the little black junction box.

Any ideas? Thanks

02-23-2014, 10:35 PM	#1
nrb's70gmc Registered User Join Date: Sep 2008 Location: magalia,ca Posts: 366	not starting-no power to starter selenoid Well the title pretty much sums it up Yesterday I moved my truck (70 gmc) to leval ground to top off the fluids Went to start it up to move it and nothing happened Thought it might have been the ignition switch so I bought a new one and put it in and nothing. (Acc-on) work fine but nothing when you turn it to start. I'm getting power to the (remote ford style) selenoid (then down to the starter) but the power wire from the ignition to the selenoid is not getting power(when turning the ignition) At the selenoid or the little black junction box. Any ideas? Thanks __________________ 1970 2wd 3/4 ton- 2004 crate 350 thorley tri-y headers-edelbrock performer eps manifold 600cfm performer carb, crane cams energizer cam,lifters, dual 2.5 magnaflows, mallory HEI, powermaster 140 amp altenator, griffen aluminum radiator.(8 MPG)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.