A/C mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

walker · 01-04-2004, 01:37 AM

The A/C is down on my truck due to the wreck a couple of months ago and the compressor leaks too, so I was wanting to rebuild the system. The only thing I realy don't like about it is the compressor mounting bracket. It is the one on the passenger side that bolts to the exhaust manifold, over the valve cover and on to the intake. Is there another mounting system I could use with this or another type of compressor that is a little nicer? I have newer heads with accessory holes in them if that helps.
BTW I have a '67 C-10, short W/P, power steering, with a 350. Thanks.

01-04-2004, 01:37 AM	#1
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	A/C mounting The A/C is down on my truck due to the wreck a couple of months ago and the compressor leaks too, so I was wanting to rebuild the system. The only thing I realy don't like about it is the compressor mounting bracket. It is the one on the passenger side that bolts to the exhaust manifold, over the valve cover and on to the intake. Is there another mounting system I could use with this or another type of compressor that is a little nicer? I have newer heads with accessory holes in them if that helps. BTW I have a '67 C-10, short W/P, power steering, with a 350. Thanks. __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.